Dialogic CP6/SC and CP12/SC

Features and Benefits

• Six or 12 independent fax cells per CP6/SC or CP12/SC
• Fax cell: Rockwell
• fax chip, 512 K of RAM, and CPU
• 14.4 Kb/s transmission speed
• 96 possible I/O address port selections
• Up to 60 channels of fax in one chassis
• Modified Huffman, Modified Read, and Modified Modified Read data compression
• ITU T.434 Binary File Transfer (BFT)
• Multipage TIFF
• No interrupts, DMA, or shared memory
• T.30 fax protocol
• Low power consumption
• V.17, V.27, V.29, and V.33 modulation

Applications

• Fax broadcasting
• Fax service bureaus
• Fax-on-demand systems
• Enterprise fax servers
• Internet fax services

The SC family of computer-based fax boards is for developers who need to mix and match high-density, high-powered fax boards used in service bureaus and voice-related applications. The CP6/SC, and CP12/SC provide six and 12 channels of capability and connect to PEB and SCbus. This enables a variety of configurations, including access to a large number of analog and digital line interface options, and the ability to mix and match computer telephony components.

Each fax cell is a microprocessor-based facsimile modem with its own CPU, custom ASIC, 512 K of RAM, and 32 K PROM. These features allow each channel to function as an independent, computer-based facsimile subsystem, interfacing with the host computer.

The CP6/SC and CP12/SC are found in applications such as fax broadcasting, interactive voice-fax response, and T-1 connections for fax.

Configurations

The CPxx/SC line integrates well with complimentary Scbus and PEB-compatible hardware. The examples below illustrate how the fax products can be used in analog and digital environments, with and without voice processing capability.

Fax-Only T-1 Mode

Application Case: A US-based enhanced fax-specific service bureau that needs at least six T-1 lines of fax to handle peak traffic.

Solution Set

• 2 CP12/SC boards
• 1 DTI/240SC board

Voice/Fax/T-1 Mode

Application Case: A customer is installing an information-on-demand system. Twenty-four voice lines and 12 fax channels (which can be shared across the 24 voice lines) are required. The customer wants to enable both one-call and two-call fax capability.

Solution Set

• 2 CP12/SC boards
• 1 D/240SC-T1 board

Technical Specifications**

Software Requirements

• GDK Windows NT*
• Windows NT ver. 4.0

Hardware Requirements

• Host requirements: Intel386™ processor or higher
• RAM: Minimum 640 K
• Monitors: VGA, EGA, Hercules* IBM PC AT*, PS/2, or compatible